Happy New Year

20180320_212715

Late last year, I posted about a leather working box I was quite pleased with, and remarked that “I must try to post more often in future. I feel a New Year’s Resolution coming on…”

Well, that worked out well, didn’t it?

20180322_200824

I guess my absense is in no small part due to the fact that I’ve been kicking the ass out of woodturning recently. I’ve missed my joinery though, so I thought I’d get back into the swing of these with a nice little project I’ve had a the back of my mind for a while. (Of course, there is a little joinery involved too).

The design is nice and simple, and upholstered footstool, consisting of twelve componants – 4 turned legs and 8 stretchers.

As always, we begin with stock preparation. I decided to go with walnut. The legs have already been turned by this stage, but I forgot to take any photos of that. Sorry.

 

Next comes the joinery – simple mortise and tenon.

 

Glue and finish. The finish is my oil/varnish/turps blend. Three coats, at least 12 hours apart.

 

Then the uphostery begins. Using my shop built webbing stretcher, I stapled on the webbing in a crisscross pattern, and then covered it in hessian. I was able to shape some foam into a rough shape using an electric carving knife.

 

I added some padding (not shown) and then measured up for the fabric. I needed to break out the sewing machine to sew up the corners of the fabric, and then I stapled it in place. I’ve got access to a button making contraption, so I was able to make 6 buttons in matching fabric.

I finished off the corners with brass effect upholstery pins and then stapled on some base cloth.

20180402_011423

Finally, I added my makers mark, and the project was done.

I had intended selling it, but Goatgirl wants to keep it!

 

 

20180402_012435

Advertisements

2 thoughts on “Happy New Year

  1. Great job on this upholstered footstool. Kudos. I assume the legs were turned on a power lathe. Where else do you typically plug in? I used a spring-pole lathe to turn the legs on a recent build of a William & Mary desk on frame.

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s