Sawyer’s Bench #1

20150417_164252

I started work on my Sawyer’s Bench this week. Last time I posted about this, all I had done was to rough cut the components from my stock of cherry (1″ by 6″ and 1½” by 2¾”). Well, now I have worked all of the components to their final dimensions  as much as I can at this stage. There will be some final adjustments to make to the aprons and cleats once the subassemblies are complete.

20150426_153528   20150428_210704

I began with the joinery for the legs and stretchers, which consist of simple half-laps. Starting with the legs, I made a mark 4″ from the bottom of each and I used the stretchers themselves to establish the width of the notch by scoring a knife line down each side. The depth, which is half the width of the leg, was established by finding the centre with my centre finder using that to set my marking gauge. No measuring required.

20150428_210838I chiseled out a ‘v’ on the waste side of the knife lines to establish a knife wall for my saw to follow, then made my cross-cuts, adding a few in between to make the chopping out easier. With the bulk of the waste removed I refined the depth with a router plane.

20150428_210923Once all of the leg notches were done, I dry-fitted the stretchers and marked out for the other half of the half-laps. I used the legs to mark out for the width and the marking gauge for the depth. Four rip-cuts, four cross-cuts and some chisel refining, and I was ready for another dry-fit to check the joinery.

The next step is to make the half-laps that join the legs to the top boards. I think that it will be easier to cut into the tops of the legs if they are not assembled. I’ll glue and peg the subassemblies once those other joints are done.

20150429_115653

 

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s